Double receiver DVB-S/S2 144Mhz-2450Mhz
build it yourself or buy a complete MiniTiounerPro already built for less than 100 euros

Re: Mintiouner Pro received but ferrite of L12 was broken

Messagede DL4OCH » Mer 22 Mai 2019 23:10

I've received 2 of them this Monday and all was fine.

Boxed and air-padded as well. No damage at all.

So, either you had bad luck, or I was on the lucky side... Who knows...


Best,
Wilm, DL4OCH
DL4OCH
 
Messages: 10
Inscription: 30 Mar 2019

Re: Mintiouner Pro received but ferrite of L12 was broken

Messagede F6DZP » Jeu 23 Mai 2019 04:36

Hello,

Full schematic for MiniTiounerpro V1 is here. http://www.vivadatv.org/viewtopic.php?f=83&t=442

I will put the MiniTiounerProV2 schematic ASAP, it is similar, but with 2 RT5047 instead of only one for the MiniTiounerpro V1.

The L12 or L212 with some part of ferrite broken is not very important, I continue to use one MiniTiounerPro with a ferrite broken and I have no difference.
They are used with the RT5047 that produce the 13/18v.


Jean-Pierre F6DZP
F6DZP
 
Messages: 1129
Inscription: 24 Déc 2010

Re: Mintiouner Pro received but ferrite of L12 was broken

Messagede G3UEQ » Jeu 23 Mai 2019 09:51

G4WIM a écrit:Hi Andy,

I have mine working ok now as far as I can tell - it also had a few bent pins on the headers, nothing serious but indicative of inadequate packaging which likely results in the ferrite inductors getting damaged.

While mine is working ok now I suspect it may have an intermittent somewhere - I'll keep a close eye on it while I await the case and display I've ordered.


73 Tim


Tim
Glad yours is working OK now, my cases arrive today, yes, I liked them so got two for other projects, the display around middle of June and PCB about end of June!

73
Andy
G3UEQ
 
Messages: 9
Inscription: 21 Nov 2016
Localisation: Worthing, West Sussex.

Précédente
Forums Statistiques

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 3 invités

Options

Retourner vers MiniTiouner Pro

cron