de F6DZP » Mar 11 Sep 2018 17:24
yes the picture shows that you are receiving a stream.
1) I suppose that you have not asked AUTO PID (button at top right) and so, the PIDS you are using are not the good one (256, 257).
2) if you have done it and the software has not found the PIDs, there is a default in the TS stream.
3) if the PIDs and codec are good and you dont see anything, there is a default in the TS stream. If your are using the software DVBexpress transmitter, very often the TS stream is bad, so this could be the reason of your problem. I can tell you if I have a record of the TS stream.
first suggestion is to record the stream ( record button) and try to read the TS file with VLC.
If VLC cannot read it that means that there is a default in your stream, I suppose that a bad solder/contact on one of the TS data bits.
In this case you record 10 sec of TS file , you send a message here with your file joined and I will tell you on which pin there is a bad contact.
73
Jean-Pierre F6DZP