vivadatv.org

F6CNB a écrit:Hi Dominique,
I have tested V2.08 this week end in order to replace the previous version at F4KLO.
Congratulations for this easy to use and wonderful software.

I found a small problem:
My configuration is a pluto sdr with the latest official firmware connected to the PC by USB
I am using OBS + DATV EASY V2.08 in DATV and SDR console 3.2 in narrow band.

When I want to switch from DATV to NB:
I clicked Stop and then Exit on DATV. Then I launched sdr console on the same pluto.
I am able to receive on the pluto but i am UNABLE to transmit.
There no error message in sdr console but not power out of the pluto sdr.
A software reset of the pluto is fixing the problem ( command pluto_reboot reset via ssh on the pluto (user root pwd analog))

73 from Remi F6CNB/N5CNB

DD0CW a écrit:Hi Dominique,

tks for the software.
Please could you fix the following issue.
The value for "Audio kb/s" on the first tab "DVB / MPEG-TS" will not be stored in your .ini file.
Each time after a new start comes the value "128kb/s" as a preset value.
But I want to have a lower value ( 32 K ) to have more for video.

73 de Frank ( DDØCW ).

Jabi a écrit:Good morning Dominic,
I think there is an error in the configuration of the Adalm-Pluto. Shouldn't the output port be 7272 instead of 8282? This is how I have it configured in my OBS:
rtmp://192.168.1.8:7272/,2407.750,DVBS2 ... lib,800,32,
In udp: udp://192.168.1.180:10000?pkt_size=1316&bitrate=1488500, to send it to Portsdown 4.
With port 8282 I don't communicate with Pluto.
Please tell me something.
73.s of Jabi, ea2aru.