F6DZP a écrit:Hello,
In 2 weeks we will have the MiniTiounerPro V2.
Many features can be found on this receiver:
- ready for receiving 2 stations at same time (useful for Duplex on Oscar-100) using next Software Dualtioune.
- 2 x RT5047 that produce 13v or 18v (400mA protected) for your LNA or LNB, one separate voltage for each different F-plug
- the MinitiounerPro has a design that allows the lowest I2C noise , Minitioune refresh rate can be 100ms (180 ms with a very slow processor like the Atom processor in my Pluto or Chuwi Tablet)
- 2 leds indicating TS1 and TS2
- 2 leds indicating LNB A/B voltage
- allows the use of LCD or Oled display
- TS1 and TS2 parallel output => we can use for developing IP interface or direct transmission to a modulator or ...
- 4 GPIO input/output
- 8 output ( with 8 leds) to drive relays, preamplifier ... depending the RF band you are using
...
The MiniTiounerPro V2 is ready for all future developments.
MiniTiounerPro V2 full synoptic_.jpg
MiniTiounerProV2_NIM_.jpg
Boitier bleu avec MiniTiounerPro et LCD vue avant_.jpg
(Price is 99 euros)
Jean-Pierre F6DZP
Hello Jean Pierre,
i am thinking to do your way. I have already got the Blue Box from Aliexpress.
I would like to add also the Display. Got the small one but i would like the bigger one.
Please can you point me to the correct one to use with the Minitiounerpro2???
I had alook at the box you have made byt it seems ytou have made all the
connections like Power supply, Antenna and USB all at the back while on the front there is just
the display.
What about the LED's? i do not see them.
Can you send me some photos of all please?
Merci
73's de Enzo IK8OZV