Page 1 of 1

MiniTiouner software don't autodetect the PRO

PostPosted: Wed 31 Oct 2018 09:55
by pascalw
Hello,

I have recieved a MiniTiouner Pro from REF.
But I have a problem the MiniTiouner software isn't detecting the "PRO" it shows only 1 reciever windows.
I have connected both USB cables, I also tested the board with the TestMyMiniTiouner_V2_0a software and al the test are running fine ( also the AUX Usb tests )

Do I need to config something in the software ?

73

Re: MiniTiouner software don't autodetect the PRO

PostPosted: Sat 3 Nov 2018 08:16
by F6DZP
hello,

When you start Minitioune, it says that it is a MiniTiouner Pro.

But Minitioune works only as a one frequency at a time receiver.

There is another software called Dualtioune that can work 2 frequencies at same time.
This software is actually beta tested and will be available next month.

73
Jean-Pierre F6DZP

Re: MiniTiouner software don't autodetect the PRO

PostPosted: Fri 9 Nov 2018 17:30
by G4KLB
I had the same question.
looking forward to trying Dualtioune when its released.


IMG_207.jpg
IMG_207.jpg (333.43 KiB) Viewed 18766 times


IMG_221.jpg
IMG_221.jpg (369.97 KiB) Viewed 18766 times


IMG_320.jpg
IMG_320.jpg (268.81 KiB) Viewed 18766 times