Page 1 sur 1

unable to receive broadcast channel

MessagePosté: Lun 25 Nov 2019 17:50
de m0aqc
Hi, i have now successfully aligned my dish and am receiving a good strong carrier lock between 75 and 80%. I am able to receive transmissions on the wide band portion.

However for some reason I am not able to receive broadcast transmissions, for example the memory channel at the bottom of the list does not enable me to receive a picture DVMODE set to DVB-S. SR27500 FREQ 11996MHZ, My dish is 100cm with green octogan LNB.

Can anyone advise please.

attached is photo of the beacon for reference.

unable to receive broadcast channel

MessagePosté: Mar 3 Déc 2019 13:34
de m0aqc
Hi group

further to my recent request for guidence regarding not being able to recieve general broadcast channels on my minitiouner v2. I have since discovered that I can recieve general broadcast using version 8 of the software, version 9 does not allow me to recieve general broadcast channels, ie sr27500 freq 11996000.

I attach 2 photos, one showing version 8 and the other version 9. This is all new to me so any help/thoughts would be grateful.

Alan

Re: unable to receive broadcast channel

MessagePosté: Mar 3 Déc 2019 18:26
de F6DZP
hello Alan,

Your signal seems to be not very strong, but should be received with both versions.

when you use the v0.8 you set the fec3/4 ( and 2 or 3 others values)
when you use the v0.9 you don't set the fec ( fec all) so it is a little more difficult for Minitioune to find the station.
Could you try the v0.9 giving the fec value? (3/4)

I am not sureif it is the reason but we must start with this test.

Jean-Pierre F6DZP

Re: unable to receive broadcast channel

MessagePosté: Dim 29 Déc 2019 18:47
de lancer21
Yeah, these fixes should work, have you managed to correct your problems?