Page 1 of 1

Skystar 2 Ver.2.6

PostPosted: Thu 6 Mar 2014 18:55
by dcblahblah
Hello Jean Pierre,

I have a Skystar 2 Ver.2.6 is installed on a Windows XP computer. Is it to control with Tutioune1600 / 3200 possible this card?
If possible, what driver or software do I need for this?
Is the Skystar 2 also ARISS receiving possible?

vy 73 Georg

Re: Skystar 2 Ver.2.6

PostPosted: Thu 6 Mar 2014 19:56
by F6DZP
Hello,
This card is very old, Tutioune1600 and Tutioune3200 does not work with it.
But I think I have one of my first version of Tutioune, more limited, made 4 years ago that can do some job with It.
I will search If I can find it on an old hard disk...

Jean Pierre

Re: Skystar 2 Ver.2.6

PostPosted: Sat 8 Mar 2014 09:19
by dcblahblah
Hello Jean Pierre,
thanks for the info.
The old software would of course be to test the Skystar2 for me very interesting.
If it is possible you would I go about a download link or a zip. File delighted.
Which TV card would you recommend? TT S2 1600 or 3200? Unfortunately I of the TT S2 3200 no datasheet.
What frequency range is the Skystar 2 Ver.2.6 possible?
Thank you for your efforts.

vy73 Georg

Re: Skystar 2 Ver.2.6

PostPosted: Fri 21 Mar 2014 19:07
by F6DZP
Hello,

You will find a comparison between S2-1600 and S2-3200 here :
http://www.vivadatv.org/viewtopic.php?f=72&t=296

About the old skystar I just found old sources. I will need to re compile and plug one Skystar card in a computer to be sure it works.
But don't remember where could be this old card...

Jean Pierre

Re: Skystar 2 Ver.2.6

PostPosted: Wed 26 Mar 2014 10:21
by dcblahblah
Hello Jean Pierre,
thank you for your effort .
if you can not find Skystar card I could test the software on my card.
A question about TT S2 1600: Can this card also decode MPEG 4.2.2 (live stream)

vy 73 Georg

Re: Skystar 2 Ver.2.6

PostPosted: Fri 28 Mar 2014 08:18
by F6DZP
Hello,

TT S2-1600 is just a tuner and DVB demodulator. It can exact the Transport Stream and send it to Windows.
It is Window tools ( Directshow demultiplexer, audio decoder, video decoder ) that do the job for displaying the video.
With Tutioune I have tested Mpeg2 and H264 video decoding that works perfectly.
Just what we need is to have the corresponding codec already installed under Windows.

Jean Pierre F6DZP