[registrad]

Thanks. Jean Pierre.
I will check conections this afternoon, but i have tested in another pc with the same results..

With Technotrend BDA driver and standard windows software, i also have problems.
The driver installs correctly but says it can not initialize by error code(10),
and in Windows software card is not recognized.

Card could be brocken?

[F6DZP]

yes

[snifer11]

Merci Jean Pierre

[F1YI]

Etonnant : 38 mois entre les deux messages ....
73 jean

[G8YTZ]

I have found (with the aid of the great Google thingy) a much simpler 2-minute method. It worked for me!

Go to the Start menu and type cmd.exe in the Search Bar. Right click on cmd.exe and choose Run as Administrator.
In the shell window copy paste the following commands, one at a time and hit Enter.
bcdedit.exe -set TESTSIGNING ON
bcdedit.exe -setloadoptions DDISABLE_INTEGRITY_CHECKS
You’ll get a confirmation that the operation completed successfully, as you can see below:

CMD Window

Screenshot 2019-08-03 at 21.47.40.png (123 KiB) Viewed 15862 times

Restart the computer for the changes to take effect.
You’ve just disabled digital driver signing in Windows 7. So now you can install any unsigned driver like SAA7146A.SYS

[F6DZP]

thank you for this new method.

Jean-Pierre F6DZP